Hyundai I10 P1642 Engine Trouble Code
What is Hyundai I10 P1642?
With Hyundai I10 P1642, you may drive for several weeks with a malfunctioning MAF sensor, but expect decreased fuel economy and eventual stalling. Shop replacement costs $240–$400 depending on vehicle. The labour is straightforward, with most cost from the part itself.
P1642 on the Hyundai I10
Service bulletins for the Hyundai I10 specifically mention P1642 as a symptom of failed purge solenoid valves in the EVAP system. The solenoid body on this platform degrades in high-humidity environments and should be inspected whenever this code appears.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Vehicle: | Hyundai I10 |
| Brand: | Hyundai |
| Model: | I10 |
| Code: | P1642 |
P1642 Hyundai I10 Symptoms
Check Engine Light
Illuminated Hyundai I10 dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration on the Hyundai I10
Starting Problems
Difficulty starting the engine
Poor Fuel Economy
Increased fuel consumption on the Hyundai I10
Increased Emissions
Failed emissions test due to P1642
P1642 Code Structure
Understanding what each digit means in the P1642 powertrain trouble code:
| P | 1 | 6 | 4 | 2 |
|---|---|---|---|---|
| Powertrain Code | Fuel And Air Metering | Fuel Temperature Sensor B Circuit Range/Performance | Injection Pump Fuel Metering Control 'B' High | Glow Plug/Heater Circuit 'A' Malfunction |
How to Fix Hyundai I10 P1642
Diagnostic Steps:
Poor running symptoms align with MAP sensor malfunction. In some cases, a faulty MAP sensor will not trigger a code. The issue may represent separate wiring concerns requiring individual diagnosis.
Repair Solution:
Regular maintenance of indicator and headlight bulbs ensures proper function. Maintain paint condition to prevent rust. Modern products make these maintenance tasks straightforward and accessible.
Technical Notes:
P1642 DTC indicating a sensor fault does not always mean the sensor itself is bad. The issue may stem from the systems being monitored or even the sensor wiring. Proper diagnosis is essential.
Hyundai I10 P1642 Repair Cost
Crankshaft reluctor ring inspection and replacement on the Hyundai I10 is a major service item costing $600–$1,100. Given the labour required to access the component, it is advisable to replace the rear crankshaft seal and crankshaft position sensor simultaneously while the area is open.
P1642 Description
P1642 engine trouble code is related to Glow Plug/Heater Circuit 'A' Malfunction.
Main Cause
The primary reason for P1642 OBD-II Engine Trouble Code is: Fuel Temperature Sensor B Circuit Range/Performance.
Common P1642 Misdiagnosis on the Hyundai I10
A common error on the Hyundai I10 is attributing P1642 to the crankshaft position sensor when the real fault is a damaged flywheel ring gear. The missing tooth pattern created by ring gear damage is intermittent and generates the same signal anomaly.
DIY Repair Guide: P1642 on Hyundai I10
For the mechanically confident Hyundai I10 owner, a DIY MAF sensor clean is a rewarding first step for P1642. Use a dedicated MAF sensor cleaner spray — not brake cleaner, which damages the sensing element — and allow the sensor to dry for 30 minutes before reinstallation.
Preventing P1642 on the Hyundai I10
For turbocharged Hyundai I10 models, allowing the engine to idle for 60–90 seconds before shutdown after hard driving reduces turbocharger heat soak and prevents the coking of oil that blocks VVT galleries — a known secondary trigger of P1642.
Frequently Asked Questions — Hyundai I10 P1642
A: Clearing the code without repair allows the fault condition to persist. Depending on the cause, this can lead to catalytic converter damage, increased fuel consumption, and secondary component failures that are significantly more expensive to address than the original fault.